|Place of Origin:||China|
|Minimum Order Quantity:||4 units|
|Packaging Details:||carton or flight case|
|Delivery Time:||5-8 working days|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Supply Ability:||500 units per month|
|Input Voltage:||AC90V-AC240V 50-60Hz||Power:||300W|
|LED:||540 Pcs SMD5050 RGB 3in1 LED||Beam Angle:||120 Degree, Flood Light Effect|
|Control Mode:||Auto-run, Sound Active, DMX, Master/slave||DMX Channel:||4CH/8CH/18CH|
|Dimmer:||0-100% Linear Dimmer||Strobe:||1-35 Flashes/second|
|Power In/out:||PowerCON In/out||DMX Data In/Out:||XLR 3Pin (XLR 5 Pin Optional)|
led wall light bar SMD5050 tricolor for productions, events, parties,nightclubs
Depending on how you set up the fixture, there are built-in color macros and color temperature presets. The colors range from Red, Green and Blue at full, with several presets in between. With regards to the white presets, they range from 1800K all the way up to 8000K, with staple presets like 2700, 4000 and 5600 all within the preset range.
Designed with an array of 6 total cells at width of just over 1m, HTK-LWW540 is comprised of a total of 540 SMD5050 tricolor LEDs, with a total power consumption of 320W, it is all about punch. With a 120° beam angle and a measured LUX of 3,870 @5m and a manufacturer rated 6,968 output lumens, this fixture has more than enough juice to throw light up more than a 20-foot surface with no problem.
There are built-in dimming modes ranging from linear to inverse square law as well as a selection of pre-built pulse width modulation settings to make sure that the fixture looks great on camera. There are also stand-alone functions including static colors, dynamic colors and a variety of different pre-built programs, and the user has the ability to customize those programs and recall them at will. The dimmer and strobe rates are all done electronically and can sync strobe perfectly at 25 fps.
The fact that the fixture includes a glare shield is an added bonus. This means that the audience is not going to have to see any reflection from the top of the fixture, which is a really sweet addition. Power is brought and sent from the fixture using PowerCON input and output connections. Data is delivered by 5-pin/3-pin XLR Connections. The HTK-LWW540 can be controlled by DMX, and it is completely RDM-enabled. Of further note, the fixture is designed so that all of the inputs are on one side of the base, while all of the outputs are on the other side, keeping all of your cable runs extremely neat and tidy.
With personality configurations for 6 cell combinations with everything from a basic RGB to a full RGB 16 bit pixel mapping option, with a total of 36 different personalities, the HTK-LWW540 is prepped to deliver. The maximum number of DMX channels the fixture can utilize is 18CH.
|POWER SUPPLY||Input Voltage: AC900V-240V, 50/60Hz(auto ranging)|
|Power consumption: 300W|
|LIGHT SOURCE||LEDs: 540 pcs SMD5050 RGB 3in1 LED|
|LEDs average lifespan: >50,000hrs|
|Drive mode: constant current|
|Drive current: 400mA|
|Typical lumen maintenance: 70% @ 50.000 hours|
|OPTICS||Lens: Customized high efficiency optical lens|
|Beam angle: 120 degree|
|CONTROL AND PROGRAMMING||Control mode: DMX, auto-run, master/slave, sound-active|
|DMX channels: 4CH/8CH/18CH|
|DMX data In/Out: 3-pin XLR ( 5-pin XLRoptional)|
|Setting and addressing: LCD display|
|EFFECTS||Color mixing mode: tricolor mixing|
|Electronic dimmer: 0-100% linear smooth dimmer, 16 bit dimming|
|Electronic strobe: 0-35 times/sec.|
|Pre-programmed color change, color fade, color jump|
|BODY||Housing: aluminum , black color|
|COOLING||Forced air convection, no noise|
|ENVIRONMENT AND PHYSICAL||IP rating: IP20|
|Environment temp: -20℃-40℃|
Suitable for events, parties, nightclubs, pubs, productions, weddings, stage installations.
Contact Person: Simon