|Place of Origin:||China|
|Minimum Order Quantity:||4 units|
|Packaging Details:||carton packing; 106x28x41cm(4 units)|
|Delivery Time:||5-8 days|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Supply Ability:||500 units a month|
|Input Voltage:||AC90V-AC240V 50-60Hz||Power:||200W|
|Color:||RGBW 4in1||Control Mode:||Auto-run, Sound Active, DMX, Master/slave|
|DMX Channel:||9CH/27CH/72CH/82CH||Dimmer:||0-100% Linear Dimmer|
|Strobe:||1-25 Flashes/second||Housing:||Die-cast Alluminun|
|IP Rating:||IP65, Waterproof|
LED wall washer 18x10W RGBW for events, productions, stage, effect, building
HTK-LWW18*10W-4IN1-IP is equipped with a wide range power supply raning from AC90V to AC240V, this makes it suitable for most countries, especially useful for those who do international touring productions. And we offer the power adator and signal adaptor for connecting to power and DMX controller.
HTK-LWW18*10W-4IN1-IP is designed as an IP65 waterproof LED wall washer light, with 18 pcs 10watt super bright LEDs and the customed optical lens, this fixture is able to project beatifully saturated colors. Each LED can be controlled seperately, the individual pixels makes it an creative LED bar fixture for light designers.
With various onboard macro colors, chasing, color change effect, HTK-LWW18*10W-4IN1-IP is able to be connected with each other to form a larger pixel mapping system, a background display can be formed to creat all kinds patterns and messages.
As an outdoor fixture, HTK-LWW18*10W-4IN1-IP is equipped with IP65 daisy-chain power cables and signal cables. And the connecting parts of this fixture are sealed with silicon rings, which provide better protection for avoiding rain damage. The front cover is a toughened glass, which is able to stand up for high pressure or impact.
The LED plate and controlling system are seperately designed. LED boards are attached with thick heat cooling parts, which is seperate from the rest parts, dissipating heat diretly into the air. And the power supply, driver and controlling systems are built seperately in the other parts. These is good for avoiding overheat, thus prolonged the LED lifespan.
And they can be set with slave ID in sequence, to make the chasing and running effect from the first to the end. In DMX mode, it is more creative. There are 4 DMX channel modes: 9CH, 27CH,72CH and 82CH. User could select the DMX modes acocrding to their needs.
There are several control modes for HTK-LWW18*10W-4IN1-IP: Auto-run, Sound active, DMX, Master/slave With various onboard programs, including macro colors, chasing, color change, color fading, strobe. Users could run this light in auto run mode, by using the onboard programs.
|POWER SUPPLY||Input Voltage: AC100V-240V, 50/60Hz(auto ranging)|
|Power consumption: 200W|
|LIGHT SOURCE||LEDs: 18pcs RGBWA 10W LEDs|
|LEDs average lifespan: >50,000hrs|
|Drive mode: constant current|
|Drive current: 400mA|
|Typical lumen maintenance: 70% @ 50.000 hours|
|OPTICS||Lens: Customized high efficiency optical lens|
|Beam angle: 25 degree, 45 degree, 60 degree|
|CONTROL AND PROGRAMMING||Control mode: DMX, auto-run, master/slave, sound-active|
|DMX channels: 9CH/27CH/72CH/82CH|
|DMX data In/Out: 3-pin waterproof connector|
|Setting and addressing: 4-digit LED display|
|EFFECTS||Color mixing mode RGBW|
|Electronic dimmer: 0-100% linear smooth dimmer, 16 bit dimming|
|Electronic strobe: 0-20 times/sec.|
|Pre-programmed color change, color fade, color jump|
|BODY||Housing: aluminum , black color|
|COOLING||Forced air convection, no fan, no noise|
|ENVIRONMENT AND PHYSICAL||IP rating: IP65, waterproof|
|Environment temp: -20℃-40℃|
|Dimensions:105*9*15cm (with yoke)|
|Weight: 8 KG|
Suitable for events, parties, wedding, outdoor building washing, outdoor production, stage effect, etc